Disconnect the network using software netcut

Netcut stands for Network Cut. Netcut means cutting jarinan or more precisely cut ties or connections. jaraingan connection speeds are divided or shared basically determined by the number of connected users kejarinan the topology used protocol settings and many other factors
If using a pristine setting, the access speed will be shared by many users are using. For example: if the connection speed = 600Kbps, and there are 6 users who use it each speed to 100Kbps, but given the limitations koneksipada another user. so the more users connected, the more is its access to the jarinan
to use this software, the steps are as follows:

1. first install the program, double click on the file netcut.exe
2. after the program is installed, open the program netcut
3. will appear that lists the current ip address
4. select the IP address of the computer you want to break up victim
5. to disconnect the network, press the cut-off
6. bandwitd of IP address allocation was going to switch to your IP address and the IP address in the cut victims will not be able to connect to the server again before you resume or before the victim IP addresses replacing 

 
news sources from : andri kristanto